The new OSP PS215 Powered Speaker is an active speaker system has balanced XLR input and output. This compact speaker can be used alone with a single input source for a small portable system or paired together and fed the main output of a mixer for powered front seakers in a complete sound system. Ergonomically designed for either vertical or horizontal positioning. When laid horizontally it's perfectally angled for a floor monitor.

Features

• LINE/MIC
  • switch to select either "Mic" position if a microphone or a low level appliance is connected; the "Line" position allows connection of high level signal sources.
• GAIN
  • regulates pre-amplification of the signal coming from the input "IN".
• HIGH/MID/LOW,
  • 3-band equalization to modify the sound tone. VOL, for volume potentiometer to control the channel signal level.
• GND/LIFT
  • 2-position selector for seperating the signal source ground and the amplifier ground circuits.
• A.A.S.S., processor
  • circuit which protects the transducers from excessive tension overloads.
• PWR LED
  • indicate the switching on of the system.

Specification:

Frequency Range (-10dB): 40Hz-18KHz
Power Capacity (Continous Pink Noise): 300W
Nominal Impedance: 8 ohms
Sensitivity (1W@1m): 97dB
Nominal Dispersion: 90° H x 60° V
Crossover Frequency: 2.5 Hz
LF Driver: FB1503
HF Driver: FE001
Maximum SPL: 122dB
Input Connectors: XLR
Dimensions (HxWxD): 720 x 365 x 495 mm
Net Weight: 28.5 kg